How to Install a Gantry Type Two-Post Car Lifter: Step-by-Step Guide

Published On - January 6, 2023

Unite Auto Equipment Knowledge

Installing a gantry-type two-post car lifter can be a challenging task, but with the right tools and instructions, it can be done easily. Here are the steps to install a gantry-type two-post car lifter:

  1. Choose the right location: The first step is to choose the right location for the car lifter. The location should be flat, level, and have enough space to accommodate the car lifter.
  2. Prepare the foundation: The next step is to prepare the foundation for the car lifter. The foundation should be strong enough to support the weight of the car lifter and the car. The foundation should be made of concrete and should be at least 4 inches thick.
  3. Install the anchor bolts: The next step is to install the anchor bolts. The anchor bolts should be installed in the foundation and should be at least 3 inches deep. The anchor bolts should be spaced according to the manufacturer’s instructions.
  4. Install the columns: The next step is to install the columns. The columns should be installed on the anchor bolts and should be leveled. The columns should be bolted to the anchor bolts using nuts and washers.
  5. Install the crossbeam: The next step is to install the crossbeam. The crossbeam should be installed on top of the columns and should be leveled. The crossbeam should be bolted to the columns using nuts and washers.
  6. Install the lifting arms: The next step is to install the lifting arms. The lifting arms should be installed on the crossbeam and should be leveled. The lifting arms should be bolted to the crossbeam using nuts and washers.
  7. Install the hydraulic pump: The next step is to install the hydraulic pump. The hydraulic pump should be installed on the side of the columns and should be bolted to the columns using nuts and washers.
  8. Install the hydraulic hoses: The next step is to install the hydraulic hoses. The hydraulic hoses should be connected to the hydraulic pump and the lifting arms.
  9. Test the car lifter: The final step is to test the car lifter. The car lifter should be tested to ensure that it is working properly. The car lifter should be tested with a car on it to ensure that it can lift the car safely.

In conclusion, installing a gantry-type two-post car lifter requires careful planning and attention to detail. By following the steps outlined above, you can install a car lifter safely and efficiently.